Taking too long? Close loading screen.

Category / PIPE FITTINGS

SEAMLESS ELBOWS       ▏  SEAMLESS REDUCERS      ▏  SEAMLESS TEES      ▏  FLANGES       ▏  GASKET FOR PIPES

Seamless elbows

Seamless elbows

European standard
PDFEXCEL

DimensionStandardSteel
SMLS HYDRO TESTED ELBOWS
33,7 x 2,6 - 273, x 6,3
EN10253-1
P235TR1

SMLS BOILED ELBOWS
21,3 x 2 – 323,9 x 7,1
EN10253-2
P235GH

Elbows 90 ° R = 1.5D, standard wall thickness.
Dimensions on request: 45 ° R = 1.5D, 45 ° R = 1D, 90 ° R = 1D

American standard
PDFEXCEL

DimensionStandardSteel
SMLS ELBOWS 1" SCH 40 - 14" SCH 40ASME B16.9
A234WPB

Elbows 90 ° LR, SCH 40 and SCH 80 (8 “to 14” SCH 80 on request) and 45 ° LR SCH 40.
Dimensions on request: 90 ° SR and 45 ° SR.

▸▸▸ SEND INQUIRY FOR SEAMLESS ELBOWS

Seamless Reducers

Seamless Reducers

American standard
PDFEXCEL

DimensionStandardSteel
SMLS CONCENTRIC REDUCERS 1" x 1/2" SCH 40 - 14" x 12" SCH 40ASME B16.9A234WPB
SMLS ECCENTRIC REDUCERS 6/4" x 1" SCH 40 - 10" x 8" SCH 40ASME B16.9A234WPB

Dimension till 3 “x 2 1/2” – SCH 40 and SCH 80, dimensions 4 “x 2” SCH 40.

European standard
PDFEXCEL

DimensionStandardSteel
SMLS CONCENTRIC REDUCERS 26,9 x 2 / 21,3 x 2 - 323,9 x 8,8 / 273 x 8,8
EN10253-2

P235TR1/
P235GH

Standard wall thickness.

▸▸▸ SEND INQUIRY FOR SEAMLESS REDUCERS

Seamless Tees

Seamless Tees

American standard
PDFEXCEL

DimensionStandardSteel
SMLS EQUAL TEES 1" SCH 40 - 14" SCH 40ASME B16.9
A234WPB

SMLS REDUCED TEES 1" x 1/2" SCH 40 - 14" x 12" SCH 40ASME B16.9
A234WPB

Dimensions 1 “- 4” SCH 40 and SCH 80, other SCH 40.

European standard
PDFEXCEL

DimensionStandardSteel
SMLS EQUAL TEES 1" SCH 40 - 14" SCH 40EN10253-2
P235TR1/ P235GH

SMLS REDUCED TEES 1" x 1/2" SCH 40 - 14" x 12" SCH 40EN10253-2
P235TR1/ P235GH

Standard wall thickness.

▸▸▸ SEND INQUIRY FOR SEAMLESS TEES

Flanges

Flanges

American standard
PDFEXCEL

DimensionStandardQuality
SLIP ON FLANGES 2" 150# - 8" 150#ASME B16.5A105/A105N
WELDING NECK FLANGES*
1" 150# SCH 40 - 16" 150# SCH 40
ASME B16.5A105/A105N
BLIND FLANGES 1" 150# - 12" 150#ASME B16.5A105/A105N

*WELDING NECK 1“ – 10” 300#, 1” – 6” SCH 80.

European standard
PDFEXCEL

DimensionStandardSteel
FLAT FLANGES. (TIP 01) DN 15 - DN 400EN 1092-1P245/250GH
WELDING NECK FLANGES (TIP 11) DN 15 RF - DN 200 RFEN 1092-1P245/250GH
BLIND FLANGES (TIP 05) DN 15 - DN 300EN 1092-1P245/250GH

DN 15 – DN 50 PN 16/40, DN 50 – DN 150 PN 6 i NP 16, DN 200 – DN 400 PN 10 i PN 16.
Slip on and blind flanges can be: FF = Flat face (A1) i RF = Raised face (B1).

▸▸▸ SEND INQUIRY FOR FLANGES

Gasket for pipes

Gasket for pipes

DimensionStandardQuality
SPIRAL WOUND 1" 150lb - 14" 150lb GRAFIT RFAiSi
316/316L

On stock: 150lb and 300lb.

▸▸▸ SEND INQUIRY FOR GASKET FOR PIPES

Get email notifications ▸▸▸

Complaint form | TOC | Copyright 2017. | Mick d.o.o.